主要特性Main Characteristics：

——

1.采用日本YASKAWA伺服電機驅動，精密行星減速機。

2.采用高精密齒輪齒條傳動，對齒輪、齒條進行防銹處理;日本進口潤滑系統及齒條吹氣，更良好的保證了設備的穩定及長期運行。

3.噴頭組動、定?？刂茊卧毩⒖刂?，每個噴嘴可獨立精確調整噴霧量，噴嘴采用萬向節結構可在任意方向進行調整，噴嘴備有可彎式噴嘴及加長噴嘴可選，適合較復雜的模具。

4.伺服噴霧采用手持式觸摸屏，在觸摸屏人機界面上可自由編輯噴涂步驟，參數設定一目了然，并帶有故障自診斷顯示功能，使用與維修都極為方便。

5.噴霧機在噴霧時可同時作上下前后運動，可設定浮動噴涂，定點噴涂。噴頭設有獨立的強力吹氣噴嘴，可有效清理模具上方殘留物。

6.噴嘴具有清洗功能，防止長期停用時涂料堵塞噴嘴。

7.具有模組存儲功能，更換模具時只需要輸入相應的模具編號即可讀取參數，避免重復參數設定而浪費時間。

8.具有前后待機功能，噴頭提前在待機位等待，提高生產效率。

1.Servo motor adopts the Japan Yaskawa drive motor and high precision planetary reducer.

2.The gear rack drive system is adopted, with nickel plated treatment taken for gear and rack to prevent rust. Improve the oiling and blowing function to the gear and rack, to well ensure the stable and long-term operation of the equipment.

3.Moving and fixed moulds of the nozzle can be controlled independently layer by layer. Spray volume of each nozzle can be independently and precisely adjusted. Nozzle can be adjusted at any direction thanks to its U-joint structure. There are optional flexible and extended nozzles to suit any complex mould.

4.Servo sprayer adopts the handheld touch screen and the spraying steps can be freely edited on the human-machine interface on it, with the parameter settings cleared at a glance. It also has the fault self-diagnosis display function for very convenient use and maintenance.

5.Sprayer can move around while spraying, with the floating spray set for fixed-point spraying. Nozzle has a separate powerful air blow pipe to effectively remove the residues above the mould.

6.Nozzle has a cleaning function and shall be plugged with coating if not used for a long time.

7.Servo sprayer has a modular storage function, so only the corresponding mould number is required to be entered to read the parameter when the replacement of the mould, to avoid a waste of time due to repeated parameters setting.

8.It has a before and after standby function. Therefore, the nozzle can wait at the standby position in advance to improve the production efficiency

主要參數Technical Parameters：

——