主要特性Main Characteristics：

——

1.主要配件及電器元件均采用進口件，故障率低，使用壽命長。

2.采用進口比例閥控制藥劑和水的比例，可隨流量的大小自動調整濃度。使其保證了混合液比例的精確和穩(wěn)定，稀釋可調整范圍 50-500 倍可選。

3.可作為一般性藥劑混合和特殊藥劑混合。

4.不銹鋼混合桶，智能液面檢測系統(tǒng)，離型劑液面低于設定值時報警燈自動報警，更人性化更安全。

5.采用鼓泡式自動攪拌（或氣動攪拌），使混合液混合均勻。

6.采用進口氣動隔膜泵，自動恒壓輸出混合液。

7.混合液液位為下限時，比例閥和水閥自動打開，開始補充混合液直到混合液液位回到上限為止。

8.原液用完時，黃色指示燈亮，警示燈亮，比例閥和水閥自動打開。直到原液補充后才恢復正常工作。

1.Main parts and electrical components adopt the imported parts with low failure rate and long service life.

2.The automatic proportional valve is used to control the proportion of agent and water, and the concentration can be adjusted automatically based on the flow, which can assure the accurate and stable mixture proportion. The adjustable range of 50-500 times for dilution is optional.

3.It can be used for mixing of general agent and special agent.

4.Stainless steel mixing barrel and smart level detection system are adopted. Automatic warning light alarm will be triggered when the release agent level is below the set value, which is more humanized and more safety.

5.The bubbling type automatic mixing (or pneumatic mixing) is adopted to make the mixture uniform.

6.Imported pneumatic diaphragm pump is adopted, featuring automatic constant voltage to output mixture.

7.When the mixture level reaches the lower limit, the proportional valve and water valve will be automatically opened and began to supplement the mixture until the mixture level returns upper limit.

8.When the concentrate is used up, the yellow indicator light and the warning lights will be on, and the proportional valve and water valve will be automatically opened. It will not be restored to normal work until the concentrate supplement is finished.

技術參數Technical Parameters：

——